Cloud API Help

Enable to control the smoke alarm. This includes:

- All networked Smoke alarms are muted
- The Smoke alarm that first detected smoke cannot be muted via the API, but only at the physical device

Enable to query the status of the smoke alarm. This includes:

• Alarm siren sounds or does not sound
• Alarm siren was silenced

Share to access the streams, events and data from the cameras. This includes:

- Access to live streams
- Camera head rotation (360° indoor camera)
- Access and download all saved clips
- Query a list of all stored events
- Query the last snapshot
- Query the online status of the cameras
- Query the privacy mode of the camera
- Query the status of the upper and lower lamp (Eyes outdoor camera)

Motion and sound sensors:
- Query whether the motion sensor is switched on
- Query whether the sound sensor is switched on
- Forwarding of alarms triggered by motion
- Forwarding of alarms triggered by sounds

Enable to query the status of the Door/window contacts. This includes:

- Door/window is closed or open
- Battery status

Release to control the indoor climate. This includes:

- Set target temperature

Release to access the live streams from the cameras. This includes:

- Query live streams
- Rotation of the camera head of the indoor camera

Enable to query data and control the devices and services of the "Comfort" domain. This includes:

Room temperature:
- Measured room temperature
- Set room temperature
- Operating mode (manual/timer)
- Set target temperature

Smart plug:
- Smart plug is switched on/off
- Operating mode (manual/timer)
- Energy consumption
-Power consumption
- Intended use (e.g. whether the Smart plug is used as a luminaire)
- Switch Smart plug on/off

Light controls:
- Light control is switched on/off
- Operating mode
- Energy consumption
- Power consumption
- Switch Light control on/off

Door/window contacts:
- Query whether door/window is closed or open
- Query of the battery status

Shutter controls:
- Query of the position of the shutter or blind
- Query of the operating status
- Changing the position of the shutter or blind

Scenarios:
- Querying data for scenarios

Rooms:
- Room name query

Enable to turn on the privacy mode. Privacy mode turns the camera off.

Enable to switch on the alarm system

Enable to control the alarm system. This includes:

- Switching the alarm system on and off
- Mute the alarm system

Enable to query the status of the room climate. This includes:

- Measured room temperature
- Set room temperature
- Operating mode (manual/timer)

Enable to query the status of the alarm sirens. This includes:

- Alarm siren sounds or does not sound
- Alarm siren is muted

Enable to query the status of the alarm system. This includes:

- Alarm system is switched on/off
- Alarm system was last switched on/off (time)

Enable to control the Light controls. This includes:

- Switch Light control on/off

Enable to control the smart home cameras. This includes:

- Turn off privacy mode
- Configuration of the motion and noise sensor
- Camera head rotation (360° indoor camera)
- Switching the lamps on and off (Eyes outdoor camera II)
- Change front lamp brightness settings (Eyes outdoor camera)
- Change names of events
- Mark events as favorites
- Mark events as seen or unseen

Enable to turn on and configure the smart home cameras. This includes:

- Turn off privacy mode
- Configuration of the motion and noise sensor
- Switching the lamps on and off (Eyes outdoor camera II)
- Change front lamp brightness settings (Eyes outdoor camera)

Enable to retrieve data and clips from the smart home cameras. This includes:

- Access and download all saved clips
- Query a list of all stored events
- Query the last snapshot
- Query the online status of the cameras
- Query the privacy mode of the camera
- Query camera head position (360° indoor camera)
- Querying the status of the lamps (Eyes outdoor camera)

Motion and sound sensors:
- Query whether the motion sensor is switched on
- Query whether the sound sensor is switched on
- Forwarding of alarms triggered by motion
- Forwarding of alarms triggered by sounds

Enable to manage the stored events. This includes:

- Change names of events
- Mark events as favorite

Multiple actions:
- Mark events as unseen/seen

Enable to control the lamps of the smart home cameras. This includes:

- Switching the lamps on and off (Eyes outdoor camera II)
- Change the brightness setting of the front lamp

Enable to query the status of your Bosch smart home system. This includes:

- Room temperature
- Alarm system is switched on/off
- Alarm status
- Smoke alarm status
- Smart plug status
- Light control status
- Shutter control status
- Motion detector status
- Door/window contact status
- Scenario data
- Smart Home controller data
- Room names
- Water alarm status

Enable to turn on and configure the smart home cameras. This includes:

- Turn off privacy mode
- Configuration of the motion and noise sensor
- Switching the lamps on and off (Eyes outdoor camera II)
- Change front lamp brightness settings (Eyes outdoor camera)

Release to control your Bosch smart home system. This includes:

- Room temperature control

- Switching on the alarm system- Switching on and off the Smart plugs

- Controlling the Light controls

- Controlling the shutter control

- Mute the water alarm

Enable to query the status of the Shutter controls. This includes:

- Position of the shutter / blind
- Operating status

Enable to query the status of the Light controls. This includes:

- Light control is switched on/off
- Operating mode
- Energy consumption
- Power consumption

Enable to control the Shutter controls. This includes:

- Changing the position of the shutter or blind

Release to query information on scenarios . This includes:

- Scenario name
- Time at which the scenario was last triggered

Enable to control scenarios

Enable to query the status of the Motion detectors. This includes:

- When was the last time movement was detected
- Battery status

Enable to query information about rooms

Enable to query the status of your Bosch smart home system and cameras. This includes:

Smart Home System:
- Room temperature query
- Query whether the alarm system is switched on
- Query the status of the alarm
- Query the status of the smoke alarm
- Query the status of the Smart plugs
- Query the status of the Light controls
- Requesting the status of the shutter controls
- Query the status of the Motion detectors
- Requesting the status of the Door/window contacts
- Query data on scenarios
- Querying data from the Smart Home controller
- Room name query
- Query the status of the water alarm

Cameras:
- Livestream release
- Camera head rotation (360° indoor camera)
- Access and download all saved clips
- Query a list of all stored events
- Query the last snapshot
- Query the online status of the cameras
- Query the privacy mode of the camera
- Query the status of the upper and lower lamp (Eyes outdoor camera)
- Notifications about current alarms
- Query whether the motion sensor is switched on
- Query whether the sound sensor is switched on
- Access to events triggered by motion
- Access to events triggered by sounds

Enable to query data from the Smart Home controller. This includes:

- Software version
- Software update status
- MAC address

Enable to query the status of the Smart plugs. This includes:

- Smart plug is switched on/off
- Operating mode (manual/timer)
- Energy consumption
-Power consumption
- Intended use (e.g. whether the Smart plug is used as a luminaire)

Enable to control the Smart plugs. This includes:

- Switch Smart plug on/off

Enable to mute the water alarm

Enable to query the status of the water alarm. This includes:

- Water alarm sounds or does not sound

- Water alarm was muted