Universal Switch Flex help

The Universal switch can be attached to any flat surface thanks to adhesive surfaces and screws. Furthermore, an inconspicuous integration into existing switch frames is possible, provided they have an additional field. The Universal switch Flex can be used flexibly regardless of the room.

Please also refer to our installation video in this article. If you experience problems displaying the video, you can also find our installation and reset videos on our Bosch Smart Home YouTube Channel at the following link.

Please also refer to the operating/installation instructions for the Universal switch at the following link and for the Universal switch Flex at the following link.

If the Universal switch cannot be integrated, please go through the following steps:

1. Perform the installation again. Please check whether the device has already been detected. You can check this in the "Devices" menu item. Remove it beforehand if necessary.

2. Please check whether the batteries are inserted correctly. If the batteries are inserted correctly, the LED on the front briefly lights up.

3. Perform a reset before reinstalling. To do this, open the battery cover and press the button on the front while reinserting the batteries until the LED of the Universal switch flashes orange. Release briefly and press the button again until the LED lights up green. Then follow the connection instructions again.

4. Briefly disconnect the Smart Home Controller from the power supply and try again. Also make sure that the component is at least 1 meter away from the controller during pairing.

Please also refer to our reset video in this article. If you experience problems displaying the video, you can also find our installation and reset videos on our Bosch Smart Home Youtube Channel at the followingLink.

If you continue to have questions or problems with the integration, accessibility or use of the devices, please feel free to contact ourCustomer support.

The following light combinations and corresponding meanings exist for our Universal switch / Universal switch Flex:

• Red: the process has failed, a command to the Smart Home Controller could not be confirmed.
• Orange:a process or update is being performed.
• Green:a process or update has been completed successfully.
• Short orange blinking(after green or red confirmation signal): the batteries are empty.